Vertex Plastics, Inc.
   825 North Grove Street
   P.O.Box 456
   Kearney, MO 64060
   Voice: 816.635.6727
   Fax: 816.635.4602
   www.vertexplastics.com

 

Model BA-810

Walls and Roof

  • Fiberglass exterior shell
  • Fiberglass interior shell
  • Foamed-in-place urethane core
  • Gel coat molded-in color finish both interior and exterior
  • Wall thickness: 2" with 3" at ribs
  • Roof thickness: 3" with 4" at ribs.

Standard Floor

  • Sandwich panel floor
  • 3" overall thickness
  • Fiberglass coated 3/4" wood upper face
  • 1-1/2" rigid plastic foam insulating core and wood blocking
  • Fiberglass coated 3/4" wood lower face
  • 5" steel channel beam/skid assembly with bolt-on lifting plates for handling.

Standard Door

  • Door construction same as dome
  • 2-1/4" overall thickness
  • 3 hinges
  • Door pulls inside and outside
  • Padlocking wedge levers with inside release handles
  • Continuous rubber seal.

Standard Attachment Blocking
Dense blocking fiberglassed to backside of inside fiberglass shell at mold-in recesses continuous up walls and across ceiling for the attachment of heavy accessory items.

Dimensions and Weight
Exterior width: 8'-0"
Exterior length: 10'-0"
Exterior height: 9'-1"
Floor to ceiling: 8'-0"
Std. Door opening: 2'-8" x 6'-2"
Approx. weight: 2000 lbs.

Design Loadings
Floor: 200 psf
Walls: 150 mph wind
Roof: 54 psf

Heat Transmission
U-Factor: 0.07 BTU/hr. sf. F

To see a diagram view of this model, click here

To view and print the link above, you need to have Adobe Acrobat Reader installed.
Click here to download the free Acrobat reader.